Universal Seat Cover Installation

Made for an easy installation with basic installation instructions. Each seat cover ships with 18 pieces of black 30” long attachment cords that feed through 26 web material loops sewn to the back side of the seat cover to tie the seat cover on to the seat frame. The Backrest is an OPEN style.

1. Lay the cover out upside down and tie a string to each of the loops on one side of the back rest and one side of the seat bottom.
2. Back Rest - Lay the cover over the seat, fit the top of the back rest making sure the top corners of the back rest are fitting correctly.
3. Push in the middle where the seat bottom meets the seat back and feed the seat belts through the openings in the seat bottom.
4. Locate the loops on the opposite side of the back rest. Tie the strings from the center loops top and bottom working from the center out to both sides. Don’t tie the strings in a knot until you’re sure the cover looks good and the front pockets are in the correct position on the seat bottom.
5. Seat bottom - Tie the strings to either the front or rear loops and secure the cover to the seat bottom starting from the center and working out to each side.
   

Note: Make sure the strings don't interfere with the seat brackets so the seat backrest can fold forward and back without any problems. A little stretching of the strings is okay.

If the seat cover is in a bind, Do Not Pull. Work each side evenly until you can continue with the installation.