Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Canvasback Universal Seat Covers

|Click for MORE IMAGES|

These universal seat covers for suv's are made from denier textured polyester material and come in 4 sizes. Please take your measurements according to the diagram above.

To install, fit the bottom half of the seat cover over the seat.  Use the attached hook & elastic system to anchor the cover.  Two hooks are sufficient if you cannot find anything to attach the middle hook & elastic to.  Remove your headrests (if applicable) and pull the cover up and over the back rest.  Pull the velcro apart (at the top of the seat) and put the headrests back in place.  Please note: If you have a 3 passenger seat, you must remove this cover to use the middle shoulder/seat belt.  Cut outs are provided for the seatbelt receivers. 

To Clean - Use warm, soapy water and a soft brush or sponge.  Do not use solvents, harsh chemical agents or steel wool.  Do not put in washer or dryer.  Hose off after cleaning and hang to thoroughly dry.

Please note:  Putting a wet unit on leather seats will severely damage leather.